Android KitKat 4.4.2 for Galaxy Tab 3 7.0(SM-T211)

Android 4.4.2 Kit Kat for Samsung Galaxy tab 3 7.0(3G+Wi-Fi)

This is a good news for the Galaxy Tab 3(SM-T211) users. Ever since the launch Tab 3 7.0(SM-T211) never get any updates from Samsung and there was no good custom rom for this particular device. All this is past.
Now Samsung released an update for the device in Italy and it will get through the Ota feature. But in other countries it will not get through the air(OTA). That’s why we are providing the official Kit Kat firmware from Samsung and we will explain how to install it in your device properly. So follow the simple steps below to update your device.

First of all you have to activate the developer options in the device. For that just go the Settings>Developer options>and tap it to activate.

Now you have to activate the USB Debugging option under the developer options.

Download and install the Samsung Kies from the official website of Samsung.

Switch of your tablet and press the volume down, menu, and power button on your tablet. Now the device will go to the download mode.

Connect the USB cable to the device and connect it to the computer.

Download Odin v_3.09 from this link.

Download the Kit Kat 4.4.2 firmware from this link.

Open the Odinv_3.09. The ID:COM port will turn blue. Click the AP button only after the you see the Blue color on the ID:COM port.

Now select the .tar.md5 file that you will get after extracting the Kit Kat firmware.

Confirm twice that only the Auto Reboot and F. Reset Time are checked.

Again confirm everything and click the Start button.

Your device will turn on after the flashing process and you can confirm from the About Device option of your device that you have the 4.4.2 KitKat.